How to reset the maintenance require light on 2004 honda accord lx.

Resetting the maint req'd light this is an easy one to fix.

I did read that the light will not reset with.

Needs resetting after every oil change.

How to reset honda accord maint req’d light:

Recommended for you

To reset your honda accord’s maintenance light, turn the key to the second position, press, and hold the trip knob, and wait 10 seconds before turning the key off.

Turn ignition switch to the on (ii) position.

Button, and hold it down while you.

How to successfully reset your oil maintenance light on your 2004 honda accord or similar models after your oil change

Turn off the engine.

Get in the car, push and hold the trip reset button, insert key and turn to on for at least 10 seconds.

Press and hold the select/reset button in the instrument panel.

Light starts blinking at.

Press the select/reset knob repeatedly until the engine oil life is displayed.

The β€œmaintenance required” indicator light in honda vehicles is meant to remind you to change your engine oil.

Light is merely the function of a km or mileage counter ran by the vehicle`s computer (ecu).

Either 4 or 6 cylinder engines.

This light gets triggered by the number of miles you have driven.

How to reset the maintenance require light on 2004 honda accord lx.

Here is what i am doing:

The '05 maintenance req'd light goes on according to mileage.

Turn the ignition switch to the on (ii) position.

Depress and hold the select/reset button on the right of the instrument panel beneath the odometer reading.

Just turn the key to the on position, not the start position, while holding the trip odometer push pin in until the maint req'd.

And turn the ignition switch on (ii).

You may also like

To reset your 2004 honda accord's maintenance light, turn the key to the on position in the ignition and then turn it off.

If the engine oil life is not displayed press the sel/reset knob.

Insert the ignition key into the ignition while continuing to to hold the.

Hold the button for at least 10 seconds, until the indicator.

Press and hold the select/reset knob for more than 10.

It starts to flash and go out at 6500 miles since the last reset and stays on after 7500 miles.